Description:Displays the remaining battery power in the 49g+ and 50g, including a display of the current voltage.
Current version:2.0
Author:Edwin Córdoba
Downloaded file size:4,057 bytes
Size on calculator:1 KB
User rating:1/10 with 1 vote (you must be logged in to vote)
Primary category:Utils/Misc
File date:2007-08-04 19:45:44
Source code:Not included
Download count:17,133
Version history:2007-08-04: Updated to version 2.0
2006-02-02: Added to site
Archive contents:
  Length      Date    Time    Name
---------  ---------- -----   ----
     1196  2007-05-12 18:25   batstatus20.lib
     3179  2007-08-04 19:44   batstatus20.txt
     3962  2006-02-02 00:09   techinfo.txt
---------                     -------
     8337                     3 files
Library contents:batstatus20.lib: Library 1551, BatStatus V2.0
User comments:Marcos Herculano
2012-01-16 19:49:58
Programa muito bom
Vince Davis
2012-02-21 00:33:20
This might be a very good app to run on the 50G, there are no instructions as to how to download and run this app on the 50G.Every attempt to run this app fails. If you are monitoring this site I would very much appreciate explicit directions to run this app.
Vince Davis
2012-11-22 20:38:08
I finally figured out that the ROM Upgrade files were corrupt from all sources and waited until all corrupted files had been restored to original spec's. I than install the battery monitor and it works great. This is a really nice thanks giving now.
Josip Kova
2018-08-25 16:11:55
Hello , please Can anyone explains how to use this program .
I mean i put them into library at port one but still i don't know how to run this library on my HP 50g
Abraaao Silva
2019-09-29 21:56:23
First, you have to go to the sd card folder, select all files of the battery program( using ENTER to select) and move them all to the flash folder. After doing that, you gotta do a soft reset pressing ON + F3. Now you can access the battery status by pressing Right-Shift + 2.
Teddy Chiang
2020-08-20 00:13:14
This is the only program that I could find whcih could detect both HP49g+ and HP50g's battery voltage. Good job!
Although it works perfect on my HP49g+. I still could not get really accurate voltage report on my HP50g. It read 3.76V while it's 3.72V on Fluke 87 multimeter at HP49g+. But I cannot get the report as accurate as it on my HP50g. It read 4.69V while the multimeter measured 4.98V. That's a notable difference.
Please don't take this the wrong way. I just stated what I've seen. And there should be some difference by units. But now I just use BatMon for my HP50g. It report 4.92V when I read 4.98V on my mutimeter.
Anyway, thank for the awesome program. I've been using BATV1 for a long time. I think this app is also made by the same programmer.

You must be logged in to add your own comment.

Part of the HP Calculator Archive,
Copyright 1997-2023 Eric Rechlin.