From: Dave Arnett Newsgroups: comp.sys.hp48 Subject: Re: Reset button broken Date: 1 Nov 1996 18:27:48 GMT Organization: Hewlett-Packard, MCD terence@slate.engin.umich.edu (terence) wrote: >My reset button is fallen off the HP48GX. I mean I cannot feel anything >when I stick a paper clipper to the reset hole, all I feel is a circuit >board. And my hp does not reset even though it is not lockup. Yesterday, it >locked itself to have his own private time. I cannot reset it by on A+F. >Now, I am miserable since the reset button does not work. I'm sorry to hear that your HP has taken a holiday. The reset switch is formed from the aluminum ground shield that lies along the plastic back case of your HP48. A piece of that shield is formed into a spring contact. When you press on that contact through the hole, the contact touches a large pad on the circuit board, grounding the Yorke IC Reset pin. IF the spring contact has broken, you could still actuate the Reset pin by inserting a metal widget (re-bent paper clip) through the hole to touch the large pad on the circuit board. Ground the paper clip widget using a wire to the negative battery terminal. Conversely, you could remove the batteries and use an Ohm Meter to test whether the spring contact is missing by connecting the meter between the negative battery terminal and the paper clip widget. Best of Success! Dave. ------ I don't speak for HP when I post here.